Announcements
Stanley Assembly Brings NASCAR to Tool-Smith
- Stanley Assembly Technologies brought the number 19 Elliott Sadler race car to Tool-Smith's Headquarters in Birmingham October 8th. Tool-Smith employees and customers got a chance to get up close and personal, as well as win a trip to the Richard Petty Driving Experience in Talladega. Thanks to everyone at Stanley for a great day.
Stanley 6-Ton Battery Crimper
- Battery Powered- Reduced repetitive motion injuries
- Balanced at Trigger- Reduced fatigue and one-hand operation
- Advance and hold/retract and hold- Faster crimping after positioning
- Swivel head: 180 degrees- Access difficult to reach crimps
- Standard 14.4 volt- Reduced Battery inventory, same battery as other Stanley battery crimpers and cutters
- Lightweight- Easy to use
- Audible POP when crimp complete- Improve crimping speed
- 2.6 Ah battery- More crimps per charge
- For more information see catalog
Easier Torque Analyzer
- Instant auto recognition with Mountz transducers
- Tool testing, graphing capabilities and a graphical menu
- System Accuracy +/- 0.5% of reading from 20% to 100% of full scale
- System Accuracy +/- 1% of reading from 10% to 20% of full scale
- More information
Makita Assembly goes Wireless
- Wireless Communication of Torque, Angle and Rotation Values
- Extreme Accuracy and Long-life Reliability
- Traceability through Communication of Individual Fastening Characteristics
- Confirmation of Individual Parameter Achievement
- Valuable Tool in Troubleshooting Manufacturing Fastening Processes
- Provides Theft Deterence via Disabling Function
- See catalog for more information
Expert Torque Wrenches
- Up to 1,500 final tightening values per application set-up (2,500 max)
- Up to 10 tightening traces (parameters)
- Interchangeable head design
- Choose from 25, 75, and 180 Nm
- Tri-color LED display and buzzer
- RS232 to download data to PC
- Rechargeable Battery
- See catalog
Cleco DC Goes Cordless
- Communicates data wirelessly
- One controller can run 10 tools
- Rechargeable Li-Ion Batteries
- Integrated LED and OK/NOK
- Up to 50 Nm
- See catalogs for details
IR Brings Back Steel
- Pavement Breaker Steels, Digger Steels
- Jackhammer and Rockdrill Rods and Bits
- Rivet Buster Steels and Accessories
- See catalog for more
Fastorq Spin-Torq
- Continuously Rotating Hydraulic Torque Wrench
- 36 Times Faster Than Ratcheting Wrenches
- Accuracy is +/- 3%
- 9 Models from 100 to 7,000 ft. lbs.
- See catalogs for more information
CP Angle Wrenches
- 25 to 120 Nm (18 to 88 ft.lb)
- 190 to 220 rpm
- Fastening Assurance System available
- View Catalog
- See other new products from CP
Ingersoll-Rand Releases Battery Tools
- One charger for all battery sizes and chemistries
- Smart charger renews dead batteries to like-new condition
- 1/4, 3/8, or 1/2 inch impacts have highest torque available in a battery tool
- Other tools available include grinders, cut-off tools, ratchets, and drills
- See IR's website for more information
Gage Bilt GBP722 Power Riveter
- Replaces GGBP713C
- New Ergonomic Design
- Lighter- 5.5 lbs.
- Improved Handle
- More Power- 4800 lbs. @ 90 psi
Enerpac Air Power Hydraulic Torque Wrench Pumps
- Two speed pump
- Standard heat exchanger
- Air regulator-filter-lubricator
- Transparent gauge scale overlays for all Enerpac torque wrenches
- Can be used with any brand of 10000 and 11600 psi [700 and 800 bar] single- and double-acting hydraulic torque wrenches
- ATEX95 certified for use in potentially explosive atmospheres
New Enerpac Air Powered Hydraulic Pumps
- Z-Class high efficiency pump design has higher oil flow and bypass pressure
- Improve productivity- industry-leading hydraulic flow at 700 bar (10000 psi)
- Safe for use in environments such as refinery, petro-chemical and oil & gas processing
- 4 to 40 litres (1 to 10 gal.) capacity resevoir
- Easy oil level monitoring
- Built-in user adjustable pressure relief valve
Gage Bilt GBP731 Power Riveter
- Replaces GGBP712C and GBP730E
- New Ergonomic Design
- Lighter- 5.5 lbs.
- Improved Handle
- More Power- 4800 lbs. @ 90 psi
New Enerpac Manual Torque Multipliers
- Low manual input torque can be converted to high output torque
- Accurate torque multiplication
- Maximum torque output from 1015 to 10.845 Nm
New CP Techmotive DC Right Angle Screwdriver
- Error proof fastening technology
- 10, 20, 35 and 50 in-lb
- Colored lights near the tool collar clearly indicate process acceptance or failure
- The CS2700 Controller date stamps each rundown as it captures torque and angle results
